Backroadz SUV Tent (Model 19100) Parts: Replacement Guide
By Napier Outdoors | Premium Truck and SUV Tents & Accessories | Published: 2026-10-22
Category: How-to Guides
Learn how to identify, order, and replace parts for your Backroadz SUV Tent Model 19100. Step-by-step instructions for poles, awning supports, and more.
Quick answer
To replace parts on your Backroadz SUV Tent Model 19100, identify the damaged component, order the correct genuine replacement, and follow the simple swap steps below.
Why use genuine replacement parts
Genuine Napier Outdoors parts are designed to match the original specifications of your Model 19100 tent. This ensures proper fit and reliable performance, especially for critical components like corner-to-corner poles and awning supports.
Using non-genuine parts can lead to misalignment, reduced stability, or damage to the tent fabric. Sticking with factory replacements saves time and avoids headaches during setup.
Common parts that wear out
The most frequently replaced items on the Backroadz SUV Tent Model 19100 are the corner-to-corner poles and awning poles. These take the most stress during setup and in windy conditions.
Corner-to-corner poles are available in standard or aluminum options. Aluminum adds durability without much extra weight. Awning poles support the sheltered area and can bend if overloaded.
How to replace parts on your Backroadz SUV Tent Model 19100
- 1. Identify the damaged part: Inspect the tent poles and awning supports for bends, cracks, or broken connectors. Compare the damaged piece to the parts diagram included with your tent or available online. Common mistake: ordering the wrong pole type because the damage is not obvious. Check both ends and the connector joints.
- 2. Order the correct replacement: Visit the Napier Outdoors product page for Backroadz SUV Tent (Model 19100) Parts. Select the part you need—corner-to-corner pole or awning pole—and choose standard or aluminum if applicable. Checkpoint: verify your tent model number (19100) before ordering. The pole lengths and connectors differ between models.
- 3. Remove the old part: Unclip the tent fabric from the pole sleeve or channel. Gently slide the pole out of its sleeve. If the pole is broken, use caution to avoid tearing the fabric on sharp edges. Common mistake: pulling too hard on a stuck pole. Work it free slowly and avoid forcing it through the sleeve.
- 4. Install the new part: Insert the new pole into the sleeve, starting from one end. Push it through gradually, keeping the pole slightly flexed to follow the sleeve curve. Once in place, clip the fabric back onto the pole ends. Checkpoint: ensure the pole is fully seated in both corner pockets before securing the fabric. A loose end can collapse under tension.
- 5. Test the setup: Set up the tent in your driveway or backyard. Check that all poles sit snugly and the tent fabric is evenly tensioned. Pay special attention to the awning area if you replaced an awning pole. Common mistake: skipping the test setup and discovering a loose fit at the campsite. A quick test saves frustration.
Parts you can order
- Backroadz SUV Tent (Model 19100) Parts: Genuine replacement parts for Backroadz SUV Tent Model 19100, including corner-to-corner pole (standard or aluminum) and awning pole. Choosing the aluminum corner-to-corner pole adds extra durability without changing the fit, making it a smart upgrade if you camp frequently.
Backroadz SUV Tent (Model 19100) Parts
