Backroadz Truck Tent #13044 Replacement Parts Guide

Quick answer

Replacing poles on your Backroadz Truck Tent #13044 is straightforward, but you should expect slight length and color differences from the originals. Follow these steps to swap them correctly.

How to replace Backroadz #13044 tent poles

1. 1. Remove the old pole: Unclip the tent fabric from the pole at each sleeve or clip. Gently slide the pole out of its sleeve. Do not yank—this can tear the fabric. Common mistake: Forcing a stuck pole. If it resists, check for a tangled clip or fabric fold.
2. 2. Compare the new pole to the old one: Lay the replacement pole alongside the original. Note any length difference (1–2 inches is normal). Confirm the pole diameter matches before installing. Checkpoint: If the new pole is significantly longer or shorter than 2 inches, verify you have the correct part for the #13044 model.
3. 3. Insert the new pole: Starting at one end, feed the new pole through the fabric sleeve. Work slowly to avoid snagging the pole end on the seam. Once fully inserted, seat both ends into the grommets or clips. Common mistake: Pushing too fast can bend the pole or tear the sleeve. Use a gentle, steady motion.
4. 4. Secure the fabric and test the fit: Reattach all clips and Velcro straps. Raise the tent to check that the pole sits evenly and the fabric is taut. Adjust the pole ends if the tent appears lopsided. Checkpoint: If the tent fabric is loose on one side, the pole may not be fully seated in its grommet.

Parts you may need

• Backroadz Truck Tent #13044 (Compact Regular Bed) Parts: The color of replacement poles may differ from those in your original tent purchase. Replacement poles may be 1-2 inches longer or shorter than the original, but they are fully compatible with your tent model and will function as intended. You don't need to worry about exact color or length match—these parts are built to work even if they look slightly different.