How to Connect Backroadz Link Parts

By Napier Outdoors | Premium Truck and SUV Tents & Accessories | Published: 2026-10-24

Category: How-to Guides

Learn how to connect Backroadz Link parts for your truck tent. Step-by-step instructions for pole assembly, vestibule setup, and common mistakes to avoid.

Quick answer

Connecting Backroadz Link parts is straightforward when you follow the correct order: start with the corner-to-corner pole for structural support, then add the vestibule pole to expand covered space. Use genuine Napier Outdoors replacement parts to ensure a secure fit.

Why Use Genuine Backroadz Link Parts

Using genuine Napier Outdoors replacement parts for your Backroadz Link truck tent ensures compatibility and durability. Aftermarket parts may not match the original specifications, leading to loose connections or stress on the tent fabric.

The Backroadz Link system is designed for quick assembly, but using mismatched poles or connectors can make setup frustrating. Genuine parts like the corner-to-corner pole and vestibule pole are built to the exact dimensions of your tent.

Common Connection Mistakes

One common mistake is forcing poles into connectors that don't align. Always check that the pole ends are fully seated in the connector before applying pressure. Another issue is mixing up the corner-to-corner pole with the vestibule pole—they serve different structural roles.

If a pole feels too tight or too loose, double-check that you're using the correct part for that position. The corner-to-corner pole provides diagonal stability, while the vestibule pole frames the entry area.

Step-by-Step Connection Guide

Step 1: Identify Your Parts: Lay out all Backroadz Link parts: the corner-to-corner pole, vestibule pole, pole set, and connectors. Confirm each piece matches your tent model (e.g., Backroadz Link #19022). Mistaking the corner-to-corner pole for the vestibule pole is common—label them if needed.
Step 2: Assemble the Corner-to-Corner Pole: Connect the corner-to-corner pole segments by inserting the shock-corded ends into the ferrules. Slide the pole through the diagonal sleeve on your tent, then snap the ends into the corner connectors. Ensure the pole is fully seated in the connector; a partial connection can cause the tent to sag.
Step 3: Install the Vestibule Pole: Assemble the vestibule pole segments and insert them into the designated sleeves at the tent's entry. Attach the ends to the corner connectors or dedicated vestibule clips, depending on your model. Check that the vestibule pole curves outward, not inward, to create proper headroom.
Step 4: Secure All Connections: Once all poles are in place, go around the tent and tighten any adjustable connectors. Ensure the tent fabric is evenly tensioned and not pulling on any single pole. Loose connectors can cause the tent to collapse in wind; too tight can stress the fabric seams.
Step 5: Test the Setup: Before fully staking the tent, gently shake the structure to check for wobble. If any pole moves independently, re-seat the connection. Stake the tent corners and guylines for stability. A quick shake test can save you from a failed setup at the campsite.

Recommended Parts

Backroadz Link Parts: Napier Outdoors offers replacement parts for the Backroadz Link truck tent, including a corner-to-corner pole for diagonal support and a vestibule pole for the entry frame. Using these genuine parts ensures your tent assembles correctly and stays stable in windy conditions.
Backroadz Link Parts