How to Replace Sportz Truck Tent #57066 Parts

Quick Answer

Replacing parts for your Sportz Truck Tent #57066 is straightforward with the right approach. Focus on ordering the correct replacement pole set and following a careful disassembly and assembly process.

Step-by-Step Replacement Process

1. 1. Identify the Damaged Part: Inspect your tent and locate the broken or worn pole. Check the shock cord, pole sections, and connectors. Make a note of which pole segment needs replacement. Common mistake: ordering a full set when only one pole section is damaged. Verify which part you need first.
2. 2. Order the Correct Replacement Part: Use the product ID 534977 for the Sportz Truck Tent #57066 (Compact Short) Parts set. Confirm the part number matches your tent model. Note that replacement poles may vary slightly in color and length. Checkpoint: Ensure the part is labeled for the #57066 Compact Short to guarantee compatibility.
3. 3. Remove the Old Pole: Unzip the tent pole sleeve and carefully slide out the damaged pole. If the shock cord is broken, remove the old cord and end fittings. Keep the old pole as a reference for length and connector type. Common mistake: pulling too hard on the shock cord can damage the sleeve. Work slowly and gently.
4. 4. Install the New Pole: Insert the new pole into the sleeve, starting from one end. Feed the shock cord through the pole sections if needed. Ensure the pole sits evenly and the connectors align with the tent corners. Checkpoint: Test the fit by gently bending the pole into the tent's shape before fully securing it.
5. 5. Secure and Test the Tent: Close the pole sleeve zippers and attach the tent to your truck bed. Erect the tent fully and check for any loose connections or misalignment. Adjust as needed. Final step: Set up the tent and leave it for a few minutes to confirm everything holds. If the pole seems too long or short, it's within the acceptable tolerance and will work fine.

Parts You May Need

• Sportz Truck Tent #57066 (Compact Short) Parts: The color of replacement poles may differ from those in your original tent purchase. Replacement poles may be 1-2 inches longer or shorter than the original, but they are fully compatible with your tent model and will function as intended. Don't be alarmed if the poles look different—they will still fit and work correctly. This is a common design variation.