Start with the two sizes and the built-in pump
The Sportz Air Mattress is designed to fit between the wheel wells of a truck bed or to lay on the ground, which makes it a useful crossover piece for truck camping, road trips and backyard sleepovers. It comes in two size options: 32100, listed as Full Size at 75" x 50" x 5", and 32200, listed as Compact at 75" x 42" x 5". Both share the same length and height in the catalog; the width is what changes.
The other detail that shapes every care decision is the built-in hand pump. Because the pump is part of the mattress rather than a separate accessory, your cleaning and storage routine needs to keep grit and moisture out of that pump area. The supplied product information does not include a manufacturer cleaning procedure, so the steps below are practical habits built around the confirmed features rather than a reprinted instruction sheet.
What the listing confirms
- Sportz Air Mattress: Available in two sizes: 32100 (75" x 50" x 5") Full Size and 32200 (75" x 42" x 5") Compact. Knowing which size you own helps you store it flat without folding across the same crease every time, and it tells you which footprint you are cleaning.

Sportz Air Mattress - Sportz Air Mattress: Features a built-in hand pump for inflation without a separate pump or power outlet. The pump is the part most likely to collect dust and debris, so it deserves its own check during cleaning and storage.
- Sportz Air Mattress: Designed to fit between the wheel wells of a truck bed or to lay on the ground. The same mattress sees truck-bed grit and ground-level dirt, which is why a quick clean before storage matters more than occasional deep cleaning.
A simple cleaning routine after each trip
The goal is to remove dirt and body oils without forcing water into the pump or leaving moisture trapped in the mattress.
- Deflate fully and lay the mattress flat: Open the valve and let the air out completely on a clean, dry surface. A flat mattress is easier to wipe evenly and less likely to trap debris in a fold.
- Wipe the sleeping surface with a damp cloth: Use a cloth wrung out so it is damp rather than wet, and work in sections. The supplied information does not name approved cleaners, so stick to plain water unless the manufacturer's own label says otherwise.
- Give the pump area its own pass: Wipe around the built-in hand pump with a barely damp cloth and avoid pushing water into the pump opening. Let the area air-dry before you fold anything over it.
- Air-dry completely before folding: Lay the mattress flat or drape it loosely in the shade until it is dry to the touch. Folding a damp mattress is the most common way to create a musty smell between trips.
Storage habits that protect the pump and the seams
Store the mattress deflated, clean and fully dry, ideally loosely folded or rolled rather than compressed into a tight bundle. Avoid folding along the same line every time; alternating the folds spreads the stress instead of wearing one crease. Keep it away from sharp tools, tent stakes and anything with a rough edge in the truck bed or garage.
Temperature and moisture matter as much as folding. A dry, shaded storage spot is kinder to the mattress than a damp shed or a vehicle that sits in direct sun. If you store it in a bin, leave the lid loose enough for air to move rather than sealing residual moisture inside.
How to run a leak check before your next trip
A slow leak is easier to find at home than at the campsite. Run this check a few days before you leave so you have time to react.
- Inflate with the built-in hand pump: Fill the mattress until it feels firm, then close the valve fully. Because the pump is built in, you can do this without hunting for a power outlet.
- Listen and feel along the seams: Run your hand slowly along the edges and the valve area, listening for a faint hiss. A quiet room makes small leaks easier to hear.
- Watch for slow deflation: Leave the inflated mattress undisturbed for a while and check whether it has softened. A mattress that holds firm overnight is a good sign; one that sags points to a leak worth locating.
- Mark the spot and check the valve first: If you find a suspect area, note it with a small piece of tape. Check that the valve is clean and fully closed before assuming the mattress body is at fault, since a bit of grit in the valve can mimic a leak.
What the supplied information does not cover
The catalog details confirm the sizes, the built-in hand pump and the intended use in a truck bed or on the ground, but they do not include a manufacturer cleaning solution, a repair patch procedure, a weight limit or a warranty statement. If you find a leak that a clean valve does not explain, or if the mattress needs a repair beyond your comfort level, contact Napier Outdoors directly rather than improvising with an unlisted patch kit. Treat the routine above as sensible care, not a substitute for the manufacturer's own guidance.


